Warning: Cannot modify header information - headers already sent by (output started at /var/www/html/wp-content/themes/classipress/includes/theme-enqueue.php:335) in /var/www/html/wp-includes/feed-rss2.php on line 8
JAPAN PRODUCTS: Business Directory of Japanese Companies » Measurement Instruments http://japan-product.com Japan-Product.com is a business directory which globally promotes high quality Japanese products and services for BtoB, BtoC and BtoG marketplaces. Our mission is to support and coordinate global directory services for medium to small Japanese companies. Wed, 09 Oct 2019 14:40:36 +0000 en-US hourly 1 http://wordpress.org/?v=3.5.1 Terra Drone Corporation – Commercial drone service focused on surveying and inspection http://japan-product.com/ads/terra-drone/ http://japan-product.com/ads/terra-drone/#comments Fri, 12 Oct 2018 00:22:47 +0000 JAPAN PRODUCTS http://japan-product.com/?post_type=ad_listing&p=22229 Terra Drone established in 2016, is a leading global commercial drone technology company and is headquartered in Tokyo. The company has 10 subsidiaries in Japan, APAC, EU, Africa, North America, and South America. Terra Drone mainly focuses on Mining, Construction, Energy Utility, and Oil & Gas applications. For these industries, Terra Drone provides turn key packages including cutting-edge hardware, software, service on site, and UTM (Unmanned Traffic Management).

The group company, Terra Motors, manufactures and sells innovative electric two wheelers and three wheelers throughout Asia. Sales figures are above 30,000 per unit.

Services

  • Land Surveing
    Depending on project requirements, data product offerings include three-dimensional models, sectional view and volumetric calculations. The cost of method is one fifth and the time can be as low as one tenth of conventional surveying methods.

  • Forest Survey
    Terra Drone can provide forest survey services with laser equipped UAV. Surveying with the laser enables measurement and identification of forestry areas that are difficult to measure with aerial photogrammetry.

  • Mine Surveying
    Terra Drone provides accurate deliverable with our long withstanding performance UAV. UAVs effectively collect accurate data from an entire open pit operation and generate client specific deliverables including progress monitoring, mapping data of an entire mining site, and measurement of extraction volumes.

  • Infrastructure Inspection
    SLAM (Simultaneous Localisation and Mapping) technology and crack sensing technology make it possible for drones to deliver inspection services as the same or even better than traditional methods at a comparatively low cost.

  • Infrastructure Inspection
    Service ensures inspection are conducted safely and reduces both time and cost for the operator. These benefits are available to facilities onshore and offshore as our technology can withstand all conditions.

]]>
http://japan-product.com/ads/terra-drone/feed/ 1
TOYO Corporation – A leading distributor of advanced measurement instruments and systems http://japan-product.com/ads/toyo-corp/ http://japan-product.com/ads/toyo-corp/#comments Fri, 07 Sep 2018 00:45:39 +0000 JAPAN PRODUCTS http://japan-product.com/?post_type=ad_listing&p=21171 TOYO Corporation is a Japanese technology company headquartered in Tokyo, Japan, with subsidiaries in the United States and China. Since its founding in 1953, TOYO has become the leading distributor of advanced measurement instruments and systems in Japan. TOYO introduces the latest measurement instruments and technologies from around the world in such areas as Information Communications, Automotive Measurements, Sustainable Energy and Environment, EMC (Electromagnetic Compatibility) Testing, Ocean Surveys, Software Quality and Productivity, and Medical Systems.

TOYO also engages in original product designs and develops advanced solutions for many of the markets that it serves including automotive, sustainable energy, and cyber security industries. TOYO launched “Technical Research Center” and “One Technologies Company” as new business units in 2017, following “Security & Lab Company” in 2016. These in-house organizations have since been engaged in research to further advance autonomous driving technology, AI (artificial intelligence), and security measures against ever-more intensifying cyber threats.

TOYO’s innovative products are used by many leading companies in Japan, the United States and APAC countries, helping TOYO’s customers accelerate development, reduce time-to-market, and improve product quality.

]]>
http://japan-product.com/ads/toyo-corp/feed/ 0
Mitutoyo Corporation – World’s largest provider of measurement and inspection solutions http://japan-product.com/ads/mitutoyo-corp/ http://japan-product.com/ads/mitutoyo-corp/#comments Fri, 31 Aug 2018 15:43:14 +0000 JAPAN PRODUCTS http://japan-product.com/?post_type=ad_listing&p=21047 Mitutoyo Corporation founded in 1934, is the world’s largest provider of measurement and inspection solutions offering the most complete selection of machines, sensors, systems and services with a line encompassing CMM (coordinate measuring machines), vision, form and finish measuring machines, as well as precision tools and instruments, and metrology data management software.

Mitutoyo Corporation is headquartered in Kawasaki-shi, Japan and has operations in 22 different countries such as Europe, Asia/Pacific, North America and Latin America areas. Mitutoyo’s nationwide network of Metrology Centers and support operations provides application, calibration, service, repair and educational programs to ensure that our 8,500+ metrology products will deliver measurement solutions for our customers throughout their lifetime.

]]>
http://japan-product.com/ads/mitutoyo-corp/feed/ 0
Tokai-Denshi Inc. – Manufacturing Breath Alcohol Tester for Drivers http://japan-product.com/ads/tokai-denshi-inc/ http://japan-product.com/ads/tokai-denshi-inc/#comments Wed, 08 Aug 2018 18:53:47 +0000 JAPAN PRODUCTS http://japan-product.com/?post_type=ad_listing&p=20684 Tokai-Denshi Inc. established in 1979, is the manufacturer of alcohol checker equipment such as alcohol ignition interlock, alcohol breath tester, and breathalyzer for commercial vehicles and professional drivers. The company also offers educational services by drunk driving prevention instructors.

Tokai-Denshi’s product “ALC-PROII (US Version)” is certified by United States Department of Transportation.

]]>
http://japan-product.com/ads/tokai-denshi-inc/feed/ 1
Kokudo Engineering Consultants Co., Ltd. – Inspection of Structures http://japan-product.com/ads/kokudo-engineering-consultants/ http://japan-product.com/ads/kokudo-engineering-consultants/#comments Tue, 08 Mar 2016 06:20:59 +0000 JAPAN PRODUCTS http://japan-product.com/?post_type=ad_listing&p=10404 Since its establishment in 1967, Kokudo Engineering Consultant has been gradually building up more and more works and result based on the excellent technical level, gaining credence from the market with reliable performance and reputation and grown steadily to now. Kokudo now has 5 overseas branch offices ( India, Vietnam, Philippines, Korea and USA) with 50 employees and $5million of annual sales globally.

The main business areas of Kokudo are as follows:

  1. Inspection of structures (for bridges, roads and buildings)
  2. BIM (building information modeling) design
  3. CIM (Construction information modeling) design
  4. International trading for healthcare products

The main business fields and its individual feature of Kokudo Engineering Consultants are as follows:

  1. Inspection of Structures (for Bridges, Roads and Buildings)
    For mid to long term maintenance and control the structures such as bridges, roads and buildings, Kokudo can offer following points.

    a) Total and full inspection
    b) Proposal for the re-designing for maintenance of structures
    c) Periodical maintenance plan

    In addition, Rope access method is one of the featured inspection method for bridge prepared by Kokudo where the general inspection methods such as inspection car access is limited or restricted.

  2. BIM (Building Information Modeling) Design
    BIM design is one of the featured business by Kokudo.
    BIM design is prepared for supporting building projects with 3D design to the construction project which is the total design process for creating and controlling the entire life process the structures. It applies a real time and dynamic building modeling software in 3D image and improves the productivity in both designing and construction process.

    BIM designing by Kokudo is featured at high technical level based on the business partnership with highest class of Japanese BIM design pioneered. Besides, the subsidiary office of Kokudo in India provide the extremely cost effective BIM service with high quality designing level.

  3. CIM (Construction Information Modeling) Design
    Kokudo also supports the introduction of CIM design to the civil engineering project which can express the designing concept in easier manner. In CIM design, 3D image of civil engineering structure is made which works for centralization for information, simulation of construction and shared image of completion.

  4. International Trading for Healthcare Products
    Featured products of Wheelchairs, crutches and other health / care products are being handled by Kokudo group companies globally.
]]>
http://japan-product.com/ads/kokudo-engineering-consultants/feed/ 0
Mitaka Kohki Co., Ltd. – 50% share of the market for neurosurgical microscopes http://japan-product.com/ads/mitaka-kohki-co-ltd/ http://japan-product.com/ads/mitaka-kohki-co-ltd/#comments Sun, 07 Sep 2014 04:23:34 +0000 JAPAN PRODUCTS http://japan-product.com/?post_type=ad_listing&p=8170 Mitaka Kohki manufactured the various industrial devices including a 3D measurement device and space observation device that was mounted on a rocket and satellite and subsequently used its accumulated technology to produce medical devices.
It successfully developed a neurosurgical microscope in 1988 and, always thinking from the standpoint of staff in the medical front, has designed and developed the medical devices, which the neurosurgeons in the world highly valued. Especially the operation environment was drastically improved thanks to the “overhead positioning stand” that held a microscope over doctor’s head while the device body was installed behind the doctor so that he or she could move freely.
Today, the latest version of the Cygnus microscope (modified into a much smaller overhead model to allow the surgeon greater ease of motion) has more than a 50% market share.

Mitaka Kohki is a major presence in the field of astronomical observational equipment. From its base next to the National Astronomical Observatory of Japan in the city of Mitaka, the company has developed a succession of innovative astronomical observation devices, culminating in the development of a special camera that was used by NASA onboard the Space Shuttle.

The company had technical alliance with Leica Microsystems in 1990 and started sales in the world market. The company’s products account for 15% of the total market share in the U.S. Currently it is developing a carbon-free solar power generation system and seawater desalination system as environmental countermeasures.
As a recent example, we succeeded in developing “Beamdown solar thermal device,” which collects solar light and generates energy by using high temperatures above 1,000 degrees Celsius. This device is attracting attention from the Sunbelt regions.

Product Lines:


Astronomical Telescopes

Medical Equipment

Industrial Equipment

Space Observation Devices

Solar Energy Instrument
]]>
http://japan-product.com/ads/mitaka-kohki-co-ltd/feed/ 0
Nitto Construction Inc. – Concrete Test Hammer http://japan-product.com/ads/nitto-construction/ http://japan-product.com/ads/nitto-construction/#comments Mon, 16 Jun 2014 04:10:12 +0000 JAPAN PRODUCTS http://japan-product.com/?post_type=ad_listing&p=5827 An incident in 1999 prompted President Hajime Kubo to consider the development of the CTS-02. When hearing news that a 200 kg block of concrete had fallen from a tunnel wall, Kubo wondered if Japan’s concrete structures were beginning to reach their limits. He realized that there was a need for an accurate and portable concrete testing device. Understanding that such equipment already existed, but lacked the auccuracy necessary, Kobu called on Kunio Gokudan (then an assocaie professor researching non-destructive concrete-testing methods at the department of Civil Engineering in Tokai University). Together Kobu and Gokudan overcame many technical challenges, and in 2005 unveiled Nitto Construction’s first Concrete Tester (CT). It was uniquely capable of simultaneously and automatically assessing the compressive strength of a concrete structure and the degree of deformation.


Concrete Strength Test

Strength of Slab Testing

Road Surface Deterioration

Strength Testing

CTS-02 Awards

  • Promoted in “New Hokkaido Products Trial”
  • Awarded for advancement of Construction Industry
  • Special Prize from the Ministry of Economy Trade and Industry (Japan)
  • Hokkaido, Japan “Good Design” 2005 bronze award
  • Selected for Hokkaido Good Design Competition

 
CTS-02 Hammer – Concrete Tester and Surveyor
The CTS-02 tests the strength of fresh or mature concrete with greater precision and speed than conventional rebound hammers. Requiring only seconds of set-up time and easy-to-calibrate, the CTS-02 records and analyzes data two times faster than a rebound hammer. Applying a gentle waveform of impact force at the point of hammer and concrete contact, the CTS-02 reads concrete with unprecedented precision, and even detects previously unreadable defects.
 
Applications

  • Construction Site Testing – inspecting fresh concrete to ensure it meets requirements
  • Periodic maintenance of concrete structures to monitor and prevent structural failure
  • Quality assurance testing of concrete structures to verify previous results
  • Civil engineering – state and municipal inspections and evaluations of concrete structures and compliance with regulations and building codes
  • Inspecting bridges and other concrete structures where core sampling is difficult
  • Determining the strength of an entire area of concrete (using Area Mode setting)
  • Inspecting defects in concrete products
  • Inspecting fire damage in concrete structures by measuring strength in different locations

 

]]>
http://japan-product.com/ads/nitto-construction/feed/ 1
Hanwa Electronic Ind. Co., Ltd. – Manufacturing of Semiconductor Evaluation/Measuring Instruments http://japan-product.com/ads/hanwa-electronic-ind-co-ltd/ http://japan-product.com/ads/hanwa-electronic-ind-co-ltd/#comments Thu, 03 Apr 2014 05:40:41 +0000 JAPAN PRODUCTS http://japan-product.com/?post_type=ad_listing&p=4004 Since 1980 we have developed reliable test equipments as our original brand product. We started from 256-pin ESD test equipment for semiconductor devices. Then we have furthered developments such as 1024-pin and wafer compatible. Furthermore we moved to analysis equipments and added to our product line like function tester and TLP test to examine behavior of ESD protection circuits. Our development, productions and sales always responded to our customer needs, which constantly changes over time.

We aim for making reliable products so our customers can trust, and devoting ourselves to technological development that is useful for our society. We continue our relentless challenge to contribute to build the better society, understanding changes of period and society.

Business Line:

  • Manufacturing of semiconductor evaluation/measuring instruments
  • Development of mechatronics control equipments

 

ESD:
Development and sales of analytic equipment and every kind of tester for semicondctors.

Manufacturing process of semiconductor is very complicated, but these process are divided into fifteen groups. HANWA products are installed in the process for wafer inspection and final test. These speciality know-how allows to contribute for the improvement of semiconductor reliability.

  • Automated ESD Tester
    The test capable of HBM and/or MM with capacitor

  • CDM Tester
    The tester implements to test the withstand voltage which occurs when the device contact to different electric potential object.

  • Wafer ESD Tester
    The tester is capable of HBM and/or MM on wafer.

  • TLP Tester
    The tester can implement simulate operating characteristic of protective circuit In addition capable of the VFTLP test.

  • LD/LED ESD Tester
    Performs automatic destructive evaluation of Lazer-Power.

OEM:
Design and manufacture of Electronic Circuit Boards/Electronic devices

Advanced technology that is production facilities and/or test devices offers satisfaction to customer.

  • Solution to the theme of technology
  • Design for electronic circuit board
  • Assembly of electronic devices
  • Shipment test with test vector

Technical Contents

  • Discrimination technology with linear sensor for character/mark
  • Development at our own company for software/hardware
  • Powerful technology to high frequency
  • High-density assembly
  • Quality system based on ISO9001

Nothing is as important as our customers and their needs

  • Have ordering system that provides full-responsibility and management from development to production.
  • Provide ordering system the adjust inspection after customer have designed.

Development/assembly of electronic devices, design of electronic circuit and mounting of electronic parts are strong point in our business.

]]>
http://japan-product.com/ads/hanwa-electronic-ind-co-ltd/feed/ 0
Topcon Corporation – Manufacturer of infrastructure, positioning and optical equipments http://japan-product.com/ads/topcon-corporation/ http://japan-product.com/ads/topcon-corporation/#comments Wed, 19 Mar 2014 01:57:02 +0000 JAPAN PRODUCTS http://japan-product.com/?post_type=ad_listing&p=3753 Topcon’s business lines are smart infrastructure (surveying instruments, 3D measurement, mobile mapping system), positioning (GPS, machine control system, precision agriculture) and eye care (ophthalmic instruments, optometric instruments).

Business Domain
The main operations of the Topcon are divided into the three business domains of Smart Infrastructure, Positioning and Eye Care.

  • Smart Infrastructure Company
    Smart Infrastructure Company provides world leading, highly advanced positioning products by incorporating innovative technologies such as leading-edge GPS, laser and image analysis technologies based on the optical technology Topcon has fostered since its beginning.

    Major products:
    Total station, MILLIMETER GPS, Mobile mapping, 3D Laser scanner, Field controller, Level, Theodolite, Rotating laser, Pipe laser.

  • Positioning Company
    Positioning Company is to globally expand high-precision GNSS (Global Navigation Satellite Systems) business including GNSS surveying, machine control and precision agriculture.

    Major products:
    GNSS receiver (GPS/GLONASS/Galileo), GIS, GPS+Reference station system, Machine control system, Precision agriculture, Asset management system.

  • Eye Care Company
    Eye Care Company widely contributes to society through ophthalmic instruments and systems for eye examination, measurement, diagnosis, treatment, eyeglasses lens processing among other purposes.

    Major products:
    3D OCT, Retinal camera, PASCAL photocoagulator, Laser photocoagulator, Tonometers, Slit lamps, Operation microscope, Specular microscope, Ophthalmic data system IMAGEnet, Lens edger, Vision tester, Bino vision analyzer, Auto refractometer, Auto kerato-refractometer, Lensmeter, Chart projector.

Strengths of Topcon

  1. Optical technology covering a wide spectrum of wavelength
    Only limited companies in the world can possess this technology. Our unique technology enables us to provide a broad range of solution to the customers.

  2. High-global business: Overseas sales accounted for approx 75% of net sales of Topcon
    (Fiscal 2012 consolidated basis) Approx 75% of net sales of Topcon in Fiscal 2012 was made overseas. This figure indicates that Topcon is truly global in its business activities, with supported a number of bases throughout the world.

  3. World’s No.1 and World’s first products in the worldwide market
    In Smart Infrastructure Company, electronic total station which has maintained the largest share in the worldwide market because of its functionality, performance, cost performance and variety.
    In Positioning Company, plant nutrition sensor CropSpec is the world’s first product that allows farm operators in real time to monitor crop conditions and manage the amount of fertilizer desirable for plant growth.
    In Eye Care Company, 3D optical coherence tomography integrating OCT and non-mydriatic retinal cameras, which is the first product commercialized in the world.
    Other products, spectroradiometer for ultralow luminance, an optical measurement device essential for image evaluation including colors and brightness of displays.
]]>
http://japan-product.com/ads/topcon-corporation/feed/ 0
Anritsu Corporation – Specializes in the Test and Measurement Equipment Market http://japan-product.com/ads/anritsu-corporation/ http://japan-product.com/ads/anritsu-corporation/#comments Fri, 21 Feb 2014 19:25:07 +0000 JAPAN PRODUCTS http://japan-product.com/?post_type=ad_listing&p=3513 Anritsu business expansion has occurred chiefly in the information and communication field. The company’s flagship measuring instrument business provides products and services indispensable to the development, manufacture and maintenance of a range of communication systems as typified in mobile phones and the Internet on a global scale. In addition, Anritsu technologies have incorporated into a range of products in other fields, such as IP network equipment, inspection equipment for food and pharmaceutical products, and precision measuring instruments for electronic component.

With a foundation afforded by the “Measuring Technologies” accumulated over its history of more than 110 years, Anritsu will continue to contribute to the realization of a safe, secure and comfortable society.

Products & Solutions

  • Test and Measurement
    Anritsu’s core business is test and measurement instruments for communications. Our products are used in design, manufacturing and maintenance of wired or wireless solutions, RF and microwave solutions and optical solutions, among other data communications applications.

    For Next Generation Networks (3G, 3GPP, 3GPP2, 4G, LTE), Anritsu produces testers to verify optical/digital/IP networks and equipments; handheld testers for wireless infrastructures; and Wireless/VoIP network monitoring software packages and related services.

    In addition, we make R&D and manufacturing testers for mobile handsets and general purpose testers for electronics components and emerging technologies. Anritsu test and measurement solutions have built a reputation for reliability, accuracy and a full range of features in a customer friendly package.

  • Components and Devices
    Anritsu provides the building blocks of today’s complex fiber optical and wireless communications systems designed to the highest standards of performance and reliability. Anritsu offers high speed active and passive optical devices; bringing your optical system to life with a full line of laser diodes and receiver modules. For wireless networks, Anritsu maintains its leadership role with precision measurement and power management solutions that deliver superior accuracy at low cost.

  • Service Assurance
    Service Providers, their networks and their customers all have unique needs and to meet them requires a completely customized solution. Anritsu is the first monitoring and testing specialist to offer tailored OSS Solutions that provide business intelligence and sharpen your competitive edge.

  • Technologies/Solutions
    Anritsu supports all major standards for wired and wireless communication and is a prominent member of many standards organizations. Our philosophy is to continue providing robust support for legacy standards, and technologies while taking a leadership role in the implementation of new standards to assist our customers achieve their goals during the research and development phase. Whatever your standard or combination of standards, Anritsu customers can count on instrumentation and connectivity that is fully compatible with their networks and their devices.

  • Professional Services
    Anritsu’s commitment to offer complete end to end solutions encompasses our professional services. Our Professional services offer additional time and money by improving efficiency and quality in our customers daily production. Quality is always at the forefront of our customers mind and ours in the services we provide.

  • Food and Pharmaceutical Equipment (Provided by Anritsu Industrial Solutions Co., Ltd.)
    The company provides Contaminant detection equipment, Checkweigher, Automatic combination weigher etc. based on its advanced signal processing technology and high-precision machine control technology. The company is committed to ensure the safety and security of food and pharmaceutical products through its excellent customized service and global business network across Europe and Asia.

 

]]>
http://japan-product.com/ads/anritsu-corporation/feed/ 0